Tandem Press Brake （for example as tw-2-we67y-250*6000 ） was combined by two sets of press brake.tandem achieve synchronization working.single machine was combined by worktable ram and right and left wall board.wall baord adopt assemble structure due to the transportation.the rack has enough rigidity.two cylinders install to the right and left wall board,under the effect of electric operation system,drive the slider running down.on slide there is upper dies,when upper and lower dies touch workpieces,system raise pressure,form the workpieces.use different dies,under different bending,can get the different types of workpieces.the quality is reliable and stable.
1. Technique Parameters Of Machine
| SN | Description | Value | Unit | |
| 1 | Nominal Pressure | 2*2500 | KN | |
| 2 | Length Of Worktable | 2*6000 | MM | |
| 3 | Max Slider Stroke | 250 | MM | |
| 4 | Max Opening Height | 760 | MM | |
| 5 | Throat Depth | 600 | MM | |
| 6 | Power | 2*15 | KW | |
| 7 | Figure | L | 12000(Tandem) | MM |
| W | 2300 | MM | ||
| H | 3460 | MM | ||
| 8 | Gross Weight | 52000 | KG | |
2. Description Of Machine
This Machine Was Combined By Two Sets Of 250 Tons Press Brake. Tandem Achieve Synchronization Working. Single Machine Was Combined By Worktable Ram And Right And Left Wall Board. Wall Board Adopt Assemble Structure Due To The Transportation. The Rack Has Enough Rigidity. Two Cylinders Install To The Right And Left Wall Board, Under The Effect Of Electric Operation System, Drive The Slider Running Down. On Slide There Is Upper Dies, When Upper And Lower Dies Touch Workpieces, System Raise Pressure, Form The Workpieces. Use Different Dies, Under Different Bending, Can Get The Different Types Of Workpieces. The Quality Is Reliable And Stable.
3. Figure
4. Major Spare Parts Suppliers
| SN | Name | Spec. | Qty | Suppliers |
| 1 | Oil Pump | 25 Above Capacity | 2sets | Shanghai Qigao Pump |
| 2 | Motor | 15kw | 2sets | Siemens Bader |
| 3 | Adjustable Motor | 1.1kw | 4sets | Siemens Bader |
| 4 | Sealings | Full Sets | 2sets | Japan |
| 5 | Electric Components | 2sets | Schneider | |
| 6 | Hydraulic Oil | 46# Anti-Wear Hydraulic Fluid | 12barrel | Shanghai(By Users) |
| 7 | Hydraulic Valve Stack | Professional System | 2sets | Home Made |
| 8 | Cylinder Of Press Brake | Professional Cylinders | 2sets | Home Made |
5. Dies
(1). Upper dies: Each for standard die handle and pressing die, detachable, length is 12000MM.
Polygon Upper Die Round Upper Die
(2). Bottom dies: one set of combination die, V type bottom die open, length is 12000MM.
Combination Bottom Dies
6. Side Discharging